Turn your photos and song into a lighted decoration created especially for you. The picture is made from a single transparent plexiglass plate, 8 mm thick, with UV-printed photos and all the graphic design elements.

The model can be customized with multiple photos, an important date, song title, artists' names, a short message, and the names of the people. In the central area, a music player interface is graphically represented, with a progress bar and playback symbols.

All texts and symbols in the model are printed in white, making them visible both during the day and when the product is illuminated. The control elements are strictly decorative and do not represent functional buttons.

The transparent plate is inserted by sliding into a channel made in the natural wood base. The channel starts approximately halfway up the base, providing stability to the plate without closing the sides of the support.

The LED source is placed exclusively inside the base. There is no lighting behind the photos and no sandwich construction. Warm white light penetrates through the lower edge of the plexiglass, is more intense near the base, and gradually fades towards the top.

Due to its size of approximately 40 cm, the product can be placed on a dresser, nightstand, desk, shelf, console table, or in a decorative corner of the living room.

Technical Details

• Product type: custom table lighted picture
• Shape: circular
• Plate material: transparent plexiglass
• Plexiglass thickness: 8 mm
• Plate size: approximately 40 cm
• Base material: natural wood
• Base length: approximately 30 cm
• Base height: approximately 3 cm
• Plate mounting: sliding into the base channel
• Channel position: from approximately halfway up the base
• Printing type: UV printing
• Text and symbol color: white
• Lighting type: LED
• Light color: warm white
• Light source position: exclusively in the wooden base
• Lighting effect: edge lighting of plexiglass
• Recommended use: indoor
• Power supply: by cable
• Orientation: vertical, tabletop
• Customization: made to order

Dimensions may vary slightly depending on the final configuration and production process.

Maintenance

Clean the plexiglass using a soft, lint-free cloth, dry or slightly dampened. Do not use alcohol, solvents, window cleaners, abrasive sponges, or harsh chemical solutions.

The wooden base should be kept away from water, high humidity, and direct heat sources. Handle the plate by its edges to avoid fingerprints on the printed surface.